Explore our Features

 
 
 

Pressure Gauges

Built-in pressure gauges allows you to monitor the health of your unit without needing to a call an in-person service technician.

Lifting Ring

Allows easy lifting and moving of the unit during installation. Fully removable.

Rotatable Blower

360 degree fully rotatable. Fully removable for easy installation. 3 speed fan. Powerful, practical, blower.

Titanium Coil

Corrosion resistant material that will last you years* (as long as it is bonded properly*).

Electric Box

Stainless steel electric box with wiring diagram inside the lid, everything comes hard wired. Just wire in power and pump.

Bonding Wire Terminal

Comes built-in, as opposed to needing an installer to create one. Must connect to sacrificial. Protects the unit from marine electrolysis and corrosion for years to come.

Drain Pan

Stainless steel with electrophoresis paint coating for the ultimate protection.

Temp & Humidity Sensor

Comes built-in and ready to go. If you want to measure the temperature elsewhere, a spare sensor comes complimentary with each unit.

Charging Port

Built-in to the unit for easy access.

Drain Plug

Several drain plugs are available around the base of the unit for easy access.

Sound Shield

Built-in sound shield with sound compressing foam inside allows for whisper quiet operation. Sleep soundly. You can only hear the fan.

Air Filter

Re-usable air filter comes included with the unit. Washable and easily replaceable.

Technical Details

Touch screen colorful display
Wi-Fi connection to mobile app
Automatic heat - cool changeover
Horizontal or Vertical Installation
Multi Language options
Automatic pump cycling
Humidity display
Dehumidification function
On/off timer
Centigrade/Celsius or Fahrenheit option
Overheating protection
Freeze protection
Insufficient water flow protection
High/Low pressure protection
Abnormal operation protection
Ridged construction
SS316 stainless steel drain pan
Light weight
High air volume
Rotatable blower
Built in Compressor sound cover
High efficiency
Low start up current
Low pressure cut-out switch
Touch Screen Control System
High pressure cut-out switch
Compact size
Charging Port
Built-in pressure gauges
Titanium Coil
MSWA16K2 MSWA16C2
Voltage V/Hz 110-120V AC/50-60Hz 208-230V AC/50-60Hz
Cooling Capacity BTU 16000 16000
Heating Capacity BTU 17000 17000
Max. input consumption Watt 1480 1480
Running Current Amp 10.8 5.5
Starting Current Amp 17.6 11
Water Flow GPH 400 (at unit outlet- not a pump rating) 400 (at unit outlet- not a pump rating)
Indoor air Flow (Hi) CFM 500 500
Noise Level db(A) ≤44 ≤44
Dimension (W*D*H) in 23.2 x 16 x 14.4 23.2 x 16 x 14.4
Net Weight lbs 67 67
Refrigerant Type R410a R410a
Dim in mm
A 23.2 590
B 8.9 227
C 14.4 365
D 16 407
E 1.9 50
F 1.4 35
G 6 152
Water inlet/Outlet 5/8
Drain pan connection 1/2
Dim in mm
A 5.63 143
B 3.7 93
C 0.83 21
D 0.47 12
E 4.74 120
F 2.76 70
Cable Type: CAT6 Pinout: T-568B
  • Neption Smart Thermostat (Wi-fi remote controllable, touchscreen display)
  • 4 mounting brackets
  • Spare temperature and humidity sensor
  • Cable for thermostat

MarinAire Integra Series

The 16,000 BTU self-contained marine air conditioner and heat pump is a compact, all-in-one climate control system designed specifically for boats and yachts. Built for marine environments, this unit provides dependable cooling, efficient heating, and quiet operation while maintaining a space-saving footprint ideal for onboard installations.

Engineered for reliability and ease of installation, this system integrates premium marine-grade components to deliver consistent performance in humid, high-vibration conditions.


Key Features

  • 16,000 BTU cooling capacity for effective cabin temperature control

  • Integrated heat pump for both heating and cooling in one system

  • Self-contained marine AC design simplifies installation and service

  • Built-in pressure gauges for convenient monitoring and diagnostics

  • Sound shield designed to reduce operational noise

  • Touchscreen Wi-Fi thermostat included for precise temperature control

  • Rotatable blower outlet allows flexible ducting configurations

  • Titanium condenser coil for enhanced corrosion resistance

  • Stainless steel drain pan for durability in marine environments

  • Dehumidification mode helps reduce onboard moisture and humidity

  • Integrated charging port for added onboard convenience

  • 110–120V electrical compatibility with common marine power systems


Designed for Marine Use

This unit is designed exclusively for marine applications and integrates the compressor, condenser, and evaporator into a single housing. Optimized airflow and efficient heat exchange help ensure consistent operation in varying marine conditions. All materials and components are selected to withstand humidity, vibration, and corrosive environments commonly found onboard.

Why MarinAire?

MarinAire Competitor
Built-in pressure gauges
Built-In Sound Shield
Touchscreen Wi-Fi Thermostat
Rotatable Blower Sometimes
Charging Port Sometimes
Bonding Wire Terminals
Titanium Coils Sometimes
Stainless Steel Drain Pan Sometimes
Error Monitoring Sometimes
Dehumidifaction Function
Spare Temp/Humidity sensor
Timer Function Sometimes
Self Installation Does Not Void Warranty Sometimes
Phone Support for Error Codes
Standard Duct and Hose sizes Sometimes
Load video:

Have you measured your space?

Our compact marine air conditioners are designed to fit tight spaces—checking technical specifications ensures the perfect match.

Questions? Contact Us

WARNING: California residents please see- www.P65Warnings.ca.gov

MarinAire is not responsible for any outages, cancellations, policies, terms, or actions of third-party apps and service providers, including but not limited to Alexa, Tuya, Smartlife, Google, Apple, iOS, Android, Microsoft, and internet providers.

MarinAire reserves the right to modify specifications and designs presented in web pages or booklets at any time without prior notification.

FAQs

What size pump do I need?

There is no single “one-size-fits-all” seawater pump for marine air conditioners. The correct pump size depends on three factors: the air-conditioning unit, your specific installation, and the pump’s performance characteristics.

Each model lists a “Water Flow” value in the Technical Specifications tab. This rating refers to the required water flow at the unit outlet, not the pump size itself.

Because water flow is reduced by hose length, fittings, and vertical lift (head pressure), the pump selected must be capable of delivering the required flow at your actual installation head. Always reference the pump’s performance curve to confirm this.

General pump sizing guidelines

(Assumes average hose lengths and typical installations)

  • 6,000 – 9,000 BTU units: 300 GPH pump per unit
  • 11,000 – 16,000 BTU units: 500 GPH pump per unit
  • 20,000 – 24,000 BTU units: 1,000 GPH pump per unit

Multiple units

If you are running more than one air conditioner:

  • Two 16,000 BTU units require either:


    Two 500 GPH pumps, or


    One 1,000 GPH pump used with a proper relay/control panel


Important notes on pump

  1. Do not oversize the pump. Excessive flow or pressure can reduce heat-exchange efficiency, increase component wear, and cause unnecessary noise or vibration. The goal is proper, consistent flow — not maximum flow.
  2. Only use a pump designed for marine air-conditioning systems, such as a magnetic-drive seawater pump.
  3. Do not use pool pumps, general-purpose circulation pumps, or Cal-style pumps. These pumps draw significantly higher current and can damage the unit’s control circuitry or burn out the relay.


Tip:
If your installation involves unusually long hose runs, multiple elevation changes, or shared manifolds, consult the pump flow curve or a marine HVAC professional to ensure proper sizing.

Will this unit fit in my boat?

We know space on any marine vessel is limited and valuable! Our units are designed to be among the most compact in their class, but every installation space is different. Always measure your available space before purchasing.

  • For added installation flexibility, our units feature fully removable blowers, allowing the unit to be positioned in tight spaces and the blower reinstalled afterward.

Refer to the “Dimensions & Drawings” tab under each model for exact measurements, including overall size and service clearances. Confirm that there is adequate room not only for the unit itself, but also for hose connections, wiring, airflow, and future maintenance access.

Tip: If your space is tight or irregularly shaped, reviewing the dimensional drawings before ordering can help avoid installation issues.

Does this unit come with everything I need?

That depends on your specific installation.

Each unit is pre-charged, and includes the core components required to operate the system:

  • Thermostat
  • Thermostat communication cable
  • Four mounting brackets
  • Spare temperature and humidity sensor

Installation-specific items — such as seawater pumps, plumbing components, ducting, venting, grilles, and fittings — vary by vessel and layout and are not included. These items must be selected separately based on your setup.

If you are replacing an existing marine air-conditioning unit, most installations can reuse the existing set up.
Many customers refer to this as a ‘plug-and-play’ replacement.

I don't have a boat/yacht/marine application. Can I use this in a different application?

No. These units are designed exclusively for marine applications and are not supported for use outside of a marine environment.

Each marine air conditioner requires hundreds of gallons per hour of water flow from an open loop system. Water tanks, pools, tubs, etc. will not work.
They are also not UL-listed for use outside of a marine environment and are not approved for non-marine installations.

What size generator will I need?

Generator size depends on your specific MarinAire model, voltage, and what other onboard loads you plan to run at the same time. We recommend consulting a qualified marine electrician for final generator selection and installation. For a quick starting point, you can use our Generator Size Calculator, which provides a general estimate based on your unit and rounds to common real-world generator sizes.

How can I use DC power?

You can run MarinAire on DC (battery) power by using a pure sine wave inverter to convert your battery bank’s DC into AC power. Because inverter sizing, wiring, and battery performance vary by installation, we strongly recommend consulting a qualified marine electrician for accurate system design and verification. If you’d like a starting point, our Battery Power Calculator can provide a general estimate of inverter size and expected runtime based on your unit and battery setup, but results may vary in real-world conditions.

Where is this product made?

MarinAire is an American company, and our systems are invented and engineered in the United States.

Our air conditioners are built using hundreds of globally sourced components from top quality manufacturers, with parts produced in multiple countries (Japan, Germany, etc.) to meet performance and reliability standards. Final assembly is performed in China, followed by multi-stage testing and quality verification.

Before shipment, each unit undergoes final inspection and quality control in the United States to ensure it meets our performance, safety, and reliability standards.

  • 5 stars: 590 (95%)
  • 4 stars: 32 (5%)
  • 3 stars: 1 (0%)
  • 2 stars: 0 (0%)
  • 1 star: 0 (0%)
A
Anonymous

Easy to install and quite

G
Guest
"11,000 BTU Marine Ari Conditioner"

"This is a fantastic product and the sound shield makes it much quieter than my previous Cruise Air unit"

R
Robert Darling
"warranty"

"I found Marinaire to be very fair with my warranty issues that I had on a a/c unit that was 1.5 years old and out of warranty.
My problem was Freon leaking into my water cooled side of the condenser.
I felt that warranty exchange was fair, realizing that the unit was 1.5 years old.

"

M
Michael Pankow
"MARINAIRE UNIVERSAL RETROFIT CONTROL [****]/60H"

"CALLED FOUR TIMES NO RETURN CALL . IS THERE A TECH DEPARTMENT. IT HAS A PHONE NUMBER IF YOU HAVE ANY QUESTIONS 1 [****].NO ONE CALLS BACK. I WOULD NOT BUY FROM THEM AGAIN."

D
Daniel Power
"11,000 btu air conditioner "

"The product was shipped promptly and I was updated every day. The product works awesome! I am really happy with the unit I received. I will highly recommend this company and product's."

A
Anonymous

Very quiet, it’s working great !

M
Mark C Potter

This unit was easy to put in and when we fired it up it was so much quieter than our old one. One of the best things is the thermostat has wifi. Now we turn it on before we go to the marina and the boat is cool when we arrive.

A
Anthony Farneti

Buying the unit was easy and it was delivered to my door as promised.I just wish I had done more research on replacing the old unit. This unit was a bit larger but I was lucky there was plenty of room. The unit itself works well and the touch screen is easy to use. All in all it has been a positive experience.

A
Anonymous

You guys are great !!

J
James Novotny

Love the new unit! Easy install and easy operation.

R
Robert Leonard Jr.

Easy installation with straight foward instructions. Works great and with a reduced electrical draw over the previous unit, Very happy.

P
Patrick Caggiano

unit is great nice and quiet, screen is hard to see in sunlight, my control panel is right near the door in sunlight.

Other than that so far so good.

j
james lohnes

nstalled 2 16,000 btu units pn the boat. A big improvement over the old units of another brand. Quiet and very good humidity control. Would definately recommend.

A
Anonymous

Just installed yesterday, works great

W
William Hecox

A real work horse I have one that has go for 5 years without one challenge.

M
Michael Cole

I have now replaced all 3 units on board the boat with MarinAire AC units, couldn’t be more happy with the ease of installation and customer service.

A
Anonymous

Excellent product/customer support

E
Edward Boharsik

I’ve installed the unit and it seems to be running on a low suction pressure left it in dehumidifier mode through the week and I had an error code for low pressure or was it below 30° quail also, the keypad is always reading 95% humidity never changes

J
John Cirillo

Matched up perfectly with our boat. Easy to install, very straightforward. Excellent Customer Service, knowledgeable, friendly, and great communication with the staff at Marinair. Would definitely highly recommend.

A
Anonymous

Works great as expected

D
David Vagt

Absolutely perfect. Exactly as described, easy install and set up. Would recommend to anyone in need of a quite and efficient AC unit.

V
V Aliano

Very easy to install, replacing of the old unit. The thermostat having the wi-fi feature allows me to cool boat down before i get there. I can barely hear it run, mainly just hear the air flow a little. The old unit would wake you out of your sleep when it kicked on, or you couldn’t hear the TV. The air filter is a plus being a cleanable type and easy to get out. So far everything has been great with the Marinaire unit. I had a friend get one of these and when i heard it i was sold on the low sound of unit and had to have one.

M
Michael Riley

Let me start off that this is the only company I buy marine ACs from. This is the 4th purchase I've made from them. I've had numerous boats all 4 of them are still running. The 16k puts out twice the CFM as their competitors. I can hang meat in my boat dead heat of summer at noon. I will say the unit is a smidge bigger so make sure you measure the area but well made product will never purchase another brand

M
Mark Sojourner

Although I didn’t install it because my old AC came back from the dead, the customer service was great and due to the features and price of the unit, I will definitely buy it the next time I need an AC.

J
Jeremy E
Great product and customer service

Did my research and chose exactly the product I thought I needed. I was pleasantly surprised that the company calls anyway just to double check the details and the application. Great customer service!

A
Anonymous

Very pleased so far.
Shipping and packaging first rate.
I am impressed with new monitor and its ability to identify problems.
I will be installing in two weeks and will report more then

A
Anthony Potochick
New A/C

Replaced a 15 year old Cruisair (Dometic) unit. Neption touch screen is a single cable connection, so much better than the 20 wires and bus for the Cruisair controls. The new A/C uses much less amperage at both start up and during use. Tool about 4 hours to remove old system and install new MarinAire. I did not need to change out the duct or hoses since my current ones fit the new unit.

J
James Coleman
New Purchase

I was very impressed by a phone call to check my order before it was shipped. They made sure I had ordered the right thing. It arrived well packaged in just a few days. Install went very easily, even for me at 73 years young. It's only been running a couple days, and is working well on our 38 ft live aboard sail boat.

C
Charlie Graves
Wonderful

Product arrived well packaged. We replaced a much older unit that was on its last legs. It was a drop in replacement. The adjustable outlet made the fit very easy. We simply removed the blower and the unit slipped through the opening.
We have since used the cooling and heating functions. The thermostat controller works well. For added control we will soon add the remote sensor which was included.

I will add it was a very nice surprise that Marinair called after placing the order to ensure we ordered the correct unit.